scheme
back
photo
back
technical info
The perforating tool consists of a rotary cutting cylinder with lateral adjustment, working against a hardened steel roller. The shape of the perforating tool depends on the required perforating shape of the film and the lining material respectively. Depending on the cross-cutting length, the shape of the perforating tool has to be reproduced once, twice, or three times on the cutting cylinder circumference. It is also possible to install up to three cutting tools side by side.
Subject to constructional alterations.
back
back
photo
back
technical info
The perforating tool consists of a rotary cutting cylinder with lateral adjustment, working against a hardened steel roller. The shape of the perforating tool depends on the required perforating shape of the film and the lining material respectively. Depending on the cross-cutting length, the shape of the perforating tool has to be reproduced once, twice, or three times on the cutting cylinder circumference. It is also possible to install up to three cutting tools side by side.
| Format range |  |
| cutting length C | 105 mm - 470 mm |
| film width D | 40 mm - 130 mm |
| cutting width S | 0 mm - 120 mm |
back