You are here > Special applications > Tube material > Technical informations

Technical informations

TUBE FORMING MATERIAL
  1. For the process of tube forming compound material is required.
    This material must have a heat sealable PE (Polyethylene) coating of 20 to 30 micron thickness.
    Normally, the coating thickness is to be specified by the end user of the boxes.
  2. The weight of the compound material must range between 60 and 110 g/m2.
  3. Compound material for tube forming can be:
1 PE/Paper
2 PE/Aluminium foil/Paper
3 PE/Polyester
4 PE/Aluminium/Polyester